Wed-fed Offset Curing

The SST UV LED Retrofits the traditional UV, significantly lowered power consumption, freed up floor space and reduced cleanup. 

Benefits of SST UV LED Lamps

• High cure speed, 1200 fpm
• Easy maintenance 
• Lowest power consumption
• Immediate curing
• Free up floor space
• Reduce clean up
• Reduction of paper consumption

Works on Press with any width

SST UV LED curing systems for sheetfed offset printing can be readily retrofitted onto presses SST UV LED curing systems for sheetfed offset printing can be readily retrofitted onto presses with any width. We can also work directly with your press’s manufacturer to equip your new press with SST UV-LED curing technology. The SST UV LED lamp can be easily scaled up to 108 inches. 

Allows for Heat Sensitive Substrate

production of heat sensitive substrates and allows faster registration of thin film substrates, saving material and labor costs. The heat reduction extends the life of the LED lights, as heat is the primary cause of LED failure and degradation.

No Condensation

A typical SST UV LED curing system consists of A typical SST UV LED curing system consists of one LED lamp, a power-and control unit and a water re-circulator. Since the SST UV LED lamp is cooled via room temperature distilled water, there is no condensation issues and no coolant to dispose of. 

Eliminate Fire Hazards

The heat reduction also eliminate fire hazard only associated with traditional UV or other conventional UV LED system.   The SST UV-LED system has the lowest power usage. It saves 85-95% of energy.  The SST UV-LED curing systems are easy to maintain. The quartz lens are easy to clean. The LED modules are replaceable at the field.

Cures Wet-on-wet Sheetfed Inks

The SST UV LED can cure four layers of wet-on-wet sheetfed offset inks. The lamp may be mounted at the interdeck before the turn-bar and/or at the end of the press. The SST UV LED lamp is compact, it may be mounted at the coater.